Innovative design of walnut shelling machine (2)
Main functional module mechanism design
The transmission mechanism is composed of a hopper 1, a chute 2, and a U-shaped guide rail 8. An opening B is provided at equal intervals on the hopper. The spacers on the chute 2 which are alternately arranged alternately form a plurality of cells, and one cell can only accommodate one walnut at a time. The walnut enters the cell of the chute along the U-shaped track through the B port of the hopper.
At this time, the chute slides a distance of one cell length, the cell is opened, the walnut slides along the U-shaped guide rail, and the equidistant lines are arranged along the straight line into the loading position between the clamps. While the cell is open, the opening B is blocked to ensure that only one walnut is entered at a time. The reciprocating movement of the chute causes the cells to open and close intermittently, continuously releasing the walnuts in the cells and entering new walnuts.
The needle-adaptive fixture can simultaneously clamp a number of walnuts of different sizes and can accommodate different sizes of walnuts, so there is no need to classify walnuts before processing. The fixture consists of 4 parts, including two splints, springs and steel pins. The transverse diameter of the walnut is usually between 35 and 45 mm. In order to prevent the dryness of the steel needle from slipping, the clamping width is set to 27 mm. At this time, the minimum angle between the steel needle and the walnut surface is between 41 ° and 54 °, to ensure the single. There are at least 4 side clamping points, and the uniform density of the steel needle is set to 2.72 / 6 = 1.2 / cm2.
评论
发表评论